Newsgroups: misc.forsale.computers.pc-specific.motherboards
Subject: FS: 286 core, 386 core, 486 core, 586 core, Amd core, Cpu 486, Motherboard 286, Motherboard 486, Motherboard amd

THINK IT SHOULD BE CHEAPER?  MAKE AN OFFER!

The lists are current -- I am still actively selling.

286 CORE motherboard + CPU; Intel 286 CPU i R80286-10 socketed;          $  14
motherboard ET E-0 8830 CHIPS-based P82C201-10 7014-0093, all 4 CHIPS chips
are socketed; SIPP RAM amount unknown but all 36 socketed slots are filled;
standard AT keyboard port; tested weird: POSTs and allows enter setup but
display whacked (might be monitor); boards shows signs of moisture damage,
some rust here and there; needs new CMOS battery (barrel type 3.6v) as old one
has been removed to prevent corrosion (can provide one installed, ask)

386 CORE motherboard + CPU; AMD 386 DX-40 CPU Am386 NG80386DX-40, Opti-  $  40
based motherboard 82C392 82C291B, 8 ISA slots + 8 30pin SIMM slots; will need
new barrel CMOS battery (ask); all working (boots to DOS prompt)

486 CORE motherboard + CPU; Cyrix Cx486DLC Cx486DLC-33GP CPU, clone      $  29
board 92119-1 48.83001.001 55.83001.0212470390A all SIPP slots filled, has
jumper for battery pack or solder a barrel type in (ask if you want one);
w/8x30pin slots, ISA I/O card HMC-based TK 82C862 2J D18A FSIO-UC/9306;
untested (ask)

486 CORE motherboard + CPU; Intel 486DX A80486DX-33 L2350770 SX668 33MHz $  29
CPU, clone board BIOTEQ 82C3482 82C3481 8x30pin slots, 7xISA slots, math copro
slot (empty), all cache slots filled, ISA I/O card E5X5R5BTC-1505 Winbond-
based W86855F BTC 11V0 rev 2.0; should work (ask)

486 CORE motherboard + CPU; Intel Overdrive 66DX2 CPU w/sink DX20DPR66   $  79
C5010406 SZ935 V4.0; UMC UM8886F-based board UM8810PAIO rev: 1.1 w/4x72pin RAM
slots, 3 PCI slots + 4 ISA, onboard I/O; in full (tall!) AT tower case
w/Enermax power supply E250P-U (will sell with or without case, or case
separately); tested working

486 CORE motherboard + CPU; Intel Overdrive DX20DPR66 CPU, SiS-based     $  13
board GA-486VS rev.8 w/4x72pin slots + 4 ISA + 3 VLB, I/O card UMC-based,
untested; needs new CMOS battery (barrel type 3.6v) as old one has been
removed to prevent corrosion (can provide one installed, ask)

486 CORE motherboard + CPU; from AST Bravo LC 4/33 DJKASTB4-33 501124-   $  39
017; Intel 33SX CPU A80486SX-33 SX680; AST board (proprietary form factor)
w/4x72pin slots, onboard I/O, onboard VGA, PS/2 mouse port 202480 202505;
works great; 202480-302, 202505-302

486 CORE motherboard + CPU; from NCR 3230 computer; proprietary form     $  28
factor board with riser card (3 ISA slots); 486SX-25 CPU onboard + blue
upgrade socket (overdrive capable); 8 30-pin SIMM slots; UMC UM82C481BF 9309-
US based board; 517-0000801 A 517-0000317 D A9318 KU80486SX-25 SX673; board
may have been exposed to humidity but looks clean (untested, ask); compatible
overdrive CPU also available (optional, ask)

486 CORE motherboard + CPU; from NCR 3230 computer; proprietary form     $  28
factor board with riser card (3 ISA slots); 486SX-25 CPU onboard + blue
upgrade socket (overdrive capable); 8 30-pin SIMM slots; UMC UM82C481BF 9321-
AA based board; 517-0000919 A 1T00 37834 517-0000318 KU80486SX-25 SX673; board
may have been exposed to humidity but looks clean (untested, ask); compatible
overdrive CPU also available (optional, ask)

486 CORE motherboard + CPU; from NCR 3230 computer; proprietary form     $  28
factor board with riser card (3 ISA slots); 486SX-25 CPU onboard + blue
upgrade socket (overdrive capable); 8 30-pin SIMM slots; UMC UM82C481BF 9332-
AS based board; 517-0000919 A KU80486SX-25 SX673; board may have been exposed
to humidity but looks clean (untested, ask); compatible overdrive CPU also
available (optional, ask)

486 CORE motherboard + CPU; from Packard Bell PB430A 824925 PB1020MM 12- $  29
03413 FODPB411P; proprietary form factor board, w/2x72pin slots, 3xISA on
riser, onboard I/O card, onboard VGA, PS/2 mouse & keyboard port KJ006801
E77755 180459; CPU 486 SX A80486SX-33 E5V1X SX797; tested working EXCEPT dead
CMOS battery (3.6v barrel type you/I can replace); Cirrus Logic CL-GD5421-
80QC-C, DSP-0584-100 A

586 CORE motherboard + CPU; PCI board w/4x72pin, o/b I/O, full cache,    $  27
AT&PS2 KB port, IBM 586-100 CPU w/heatsink (dead fan), 3 PCI, 4 ISA, LPT & COM
cables/headers, works great

AMD CORE motherboard + CPU; Sempron 2400 + Asus A7V8X board, 3 DDR1      $  48
slots, 6 PCI + 1 AGP 8X slot, ATX form factor, includes working original AMD
heatsink+fan; SDA2400DUT3D Z453454H43308; either the board or the CPU is
flakey, but most likely not both, my bet is on the board, the system will
crash/freeze under load, I'm willing to guarantee at least 1 of the parts is
100% ok

CPU 486 w/heatsink; i486 DX2 A80486DX2-66 C4390363 E5VIX SX807           $  12
8429613GCA A4 EX 38; 66MHz 66 MHz Intel

MOTHERBOARD 286 286-NEAT JE 3010 REV 3.2 CHIPS-based Harris CS80C286-16  $  24
F3360 8913; CPU passes POST and BIOS setup; 2MB RAM SIPPS socketed qty 18
KM41C1000AP-8 927, supports ISA VGA cards; needs new CMOS battery (barrel type
3.6v) as old one has been removed to prevent corrosion (can provide one
installed, ask)

MOTHERBOARD 286 with cpu; proprietary form factor; from an Olivetti      $  40
M250; works great; 1MB RAM (4x 30pin SIMMs) included; ISA riser included;
original case lock keys included; onboard Paradise VGA, onboard I/O, 3 ISA
slots; XP 1530, XP1530, 962441 Y BA233 01 02/89 FA 8058, NEC MC-41256A9B-10
8838MD

MOTHERBOARD 486 PCI SOCKET3 S3 Socket 3, baby AT form; GA486AM/S UMC-    $  30
based UM8881F w/4x72pin slots, 3PCI+4ISA, onboard I/O

MOTHERBOARD 486 VLB SOCKET3 S3 Socket 3, 8x30 pin SIMM slots, 3 VLB + 4  $  39
ISA slots, baby AT form factor, VLB I/O card, works great; SiS 85C461 based
board, IO Promise PDC20230C Acer M5105; needs new CMOS battery (barrel type
3.6v) as old one has been removed to prevent corrosion (can provide one
installed, ask)

MOTHERBOARD 486 VLB SOCKET3 S3 Socket 3, ISA-486SV2 rev 2.4, SiS 85C460  $  11
ATQ based chipset, Intel OverDrive Ready, 8x30pin SIMM slots, 2VLB + 5ISA,
half the SIPP slots filled, includes cheesy BIOS battery replacement external
battery pack or can solder a barrel on (ask), all working

MOTHERBOARD 486 VLB SOCKET3 S3 Socket 3, M601 v1.3A, 8x30pin slots,      $  30
tested/working; needs new CMOS battery (barrel type 3.6v) as old one has been
removed to prevent corrosion (can provide one installed, ask)

MOTHERBOARD 486 VLB SOCKET3 S3 Socket 3, PT-430 UMC-based UM8498F board  $  30
w/4x30pin+2x72pin RAM slots, 3 VLB slots + 4 ISA;needs new CMOS battery
(barrel type 3.6v) as old one has been removed to prevent corrosion (can
provide one installed, ask)

MOTHERBOARD 486 VLB SOCKET3 S3 Socket 3, VIA VT82C486-based board 486-   $  20
GVT K4303854 w/4x30pin+2x72pin RAM slots, 2 VLB slots + 5 ISA

MOTHERBOARD 486 VLB SOCKET3 S3 Socket 3, baby AT form; PC Chips based,   $  30
CHIP 18 16; VLB board w/2x72pin + 4x30pin slots, 3xVLB + 4xISA slots, 9 cache
slots filled

MOTHERBOARD 486 with cpu; proprietary form factor; IBM/Cyrix Blue        $  40
Lightning 100MHz CPU, working cpu fan, IBM chipset board w/4x72pin RAM slots,
3 ISA slots on riser, PS2 ports, onboard Cirrus Logic video, onboard I/O;
powers on, passes mem count; A16NG51302X 11R4507 491 CX-83D87-33-GP BERMO REV
B

MOTHERBOARD AMD Athlon L7VMM2 BOARD, M.ATX form; 2 DIMM slots, 2PCI+1AGP $ 100

MOTHERBOARD EPIA-5000 mini-ITX board with built-in CPU VIA 15-E0500000-  $ 143
E0 EPIA REV.E, 1 PCI slot, 2 RAM slots; working

MOTHERBOARD FLAKEY SOCKET-7, Intel VX, POSTs fine, boots fine, but acts  $   4
sluggish sometimes, Linux reports signal 11 on install, sold as-is

MOTHERBOARD RISER CARD attaches to proprietary motherboard riser slot    $  31
and gives 2 PCI + 4 ISA slots (1 shared) 158-026203-000A 158-021203-000A rev
02, not sure about brand or what board it goes with

MOTHERBOARD SLOT 1 Asus P2B-S Intel i440-based board, 1 AGP, ? PCI, ?    $  88
ISA, works great, fully tested, 66/100 MHz FSB only, onboard UW-SCSI, tested
extensively works great!

MOTHERBOARD SLOT 1 Intel-chipset i440BX-based board ATX Advance 5/133E   $  62
P6I440BX/BI P6V693A/A5/133E 2.0 809-05702-201-00, 133 bus capable, 1 AGP, 4
PCI, 3 ISA, 3 DIMM; Legend QDI; 100% working thoroughly tested, includes ATX
back plate

MOTHERBOARD SLOT 1 Intel-chipset i440BX-based board ATX P6I440BX/B1S/Z1S $  60
809-02202-103-00, takes non-coppermine P2,P3,celeron (300-600Mhz), 1 AGP, 4
PCI, 3 ISA, 3 DIMM; Legend QDI; 100% working, includes ATX back plate

MOTHERBOARD SLOT 1 Intel-chipset i440BX-based board, takes non-          $  58
coppermine P2,P3,celeron (300-600Mhz), 1 AGP, 3 PCI, 1 ISA, Houston M761, 3
DIMM, M.ATX, tested working and mostly stable, sometimes seems to have trouble
turning on and has the rare crash/bluescreen but it might have just been the
Windows I was testing; 1 of the CPU retention side clips is broken but with
slot 1 you don't need it anyways; MB-MB761 01 185114100033, P7K92003857

MOTHERBOARD SLOT 1 Intel-chipset i440EX/LX-based board, takes non-       $  58
coppermine P2,P3,celeron (300-600Mhz), 1 AGP, 3 PCI, 2 ISA, Houston, 2 DIMM +
4 72pin SIMM, baby AT and ATX PS connectors, AT keyboard port; Houston M715

MOTHERBOARD SLOT 1 Intel-chipset i440ZX-based board M.ATX P6I440ZX/Z5,   $  58
takes non-coppermine P2,P3,celeron (300-600Mhz), 1 AGP, 3 PCI, 1 ISA, 2 DIMM;
Legend QDI; 100% working tested with stress benchmarks for 4 days

MOTHERBOARD SLOT 1 dual-processor Tyan Tiger 133 S1834D PCI-AGP VIA-     $ 131
VT82C694X based; 1 AGP, 6 PCI, 1 ISA, 4 DIMM, ATX form factor; should support
from low-speed celeron (400Mhz tested) through to 133-bus P3's (600EB tested
ok); tested extensively, works 100% great

MOTHERBOARD SOCKET 370 AOpen MX3L 91.88110.251 Intel-chipset LX          $  70
FW82443LX ATX; should work fine (ask); 5 available

MOTHERBOARD SOCKET 370 Florida TC 19990603 109554 M.ATX; 2xPCI 2xISA     $  60
2xDIMM onboard video+sound

MOTHERBOARD SOCKET 370 MSI 6337 MS-6337 815EPT Pro v5 Intel-chipset      $  68
815EPT (Tualatin compatible) ATX; mostly stable but has occasional reported
issues; board had bad caps and new ones have been soldered on but repair may
be unsuccessful, ask for testing

MOTHERBOARD SOCKET 370 MSI 6337 MS-6337 815ET Pro v5 Intel-chipset 815ET $  58
(Tualatin compatible) ATX; includes original box, DLED booklet, driver CD and
extra 2nd serial port adapter; has a few problems, appears to turn off DMA on
the IDE channels for no reason sometimes (maybe try using an IDE PCI card
instead?); otherwise seems stable, no crashes during testing; board had bad
caps and new ones have been soldered on but repair may have damaged it

MOTHERBOARD SOCKET 370 MSI 6368 ver:5 MS-6368L 50A VIA-chipset M.ATX; no $  62
bad caps now or ever (yet), board is 100% stable and solid

MOTHERBOARD SOCKET 370 QDI Legend Advance 10F VIA-based ATX; not sure if $  60
will do Tualatin or not, will do at least up to 1GHz CuMine Celeron; might
need some testing first (ask) but should be ok

MOTHERBOARD SOCKET 478 MSI 6580 v2.0 845GE Max Intel-chipset 845GE ATX;  $  75
100% fine, tested; includes dled bracket; original manual/cd possibly
available on request

MOTHERBOARD SOCKET 478 MSI 6580 v2.0 845GE Max Intel-chipset 845GE ATX;  $  63
this board has a weird issue but is otherwise 100% stable: if you install more
than 256MB (doesn't matter what combination) then it becomes unstable; run
with 256MB and it is 100% rock solid (tested for weeks); sold as-is

MOTHERBOARD SOCKET 478 MSI 9126 MS-9126 E7205 Master ATX; Intel 7205     $ 100
workstation chipset, supports ECC, mini-PC slot, AGP Pro slot, works perfectly
guaranteed; original manual available (G52-S9126X1)

MOTHERBOARD SOCKET5 S5 Socket 5, proprietary form; Intel FX-based board  $  62
231812119A F01 158-056352-000 2 PS2, 2 serial, 1 VGA, 1 parallel onboard, 4
72pin SIMM slots, COAST slot, 1 card/riser slot

MOTHERBOARD SOCKET7 S7 Socket 7 ATX/AT (dual-format compatible) baby AT  $  50
form; Houston PC-Chips M571, TXpro II based chipset (not Intel I don't think),
MB-M571-512k, 4 SIMM slots, 2 DIMM slots, 4PCI+3ISA, onboard sound + video
headers (cables available, ask), tested working

MOTHERBOARD SOCKET7 S7 Socket 7, AT form; Intel FX-based board TR5510    $  50
A10 Rev:1.1B, supports COAST (empty), 4 SIMM slots, 4PCI+3ISA, tested working
100% reliable

MOTHERBOARD SOCKET7 S7 Socket 7, AT form; Intel VX-based board ATC-1020, $  70
4 SIMM slots, 1 DIMM slot, 4PCI+3ISA, COAST slot; manual on floppy disk;
tested working

MOTHERBOARD SOCKET7 S7 Socket 7, AT form; SiS 6205-based 5511 5512 5513, $  50
onboard shared video, 3PCI+4ISA slots, 4 SIMM slots

MOTHERBOARD SOCKET7 S7 Socket 7, baby AT form; Intel SB82437FX FX based; $  40
4xPCI + 3xISA + COAST; 4 72p SIMM; working ok; PCI54IT-1.00 2; 8 cache chips
ISSE IS61M256-15N C9011101S6 9535

MOTHERBOARD SOCKET7 S7 Socket 7, baby AT form; Intel TX-based board      $ 119
(supports P75-P233 MMX), 2 DIMM + 4 SIMM slots, 4PCI+3ISA, tested working

MOTHERBOARD SOCKET7 S7 Socket 7, baby AT form; Intel TX-based board, 4   $  50
SIMM slots, 2 DIMM, 4PCI+3ISA

MOTHERBOARD SOCKET7 S7 Socket 7, baby AT form; Intel TX-based board, 4   $  50
SIMM slots, 2 DIMM, 4PCI+3ISA

MOTHERBOARD SOCKET7 S7 Socket 7, baby AT form; Intel VX-based board, 4   $  50
SIMM slots, 4PCI+3ISA, tested working

MOTHERBOARD SOCKET7 S7 Socket 7, baby AT form; Intel VX-based board, 4   $  50
SIMM slots, 4PCI+3ISA, tested working

MOTHERBOARD SOCKET7 S7 Socket 7, proprietary form; Compaq w/COAST slot   $  62
(COAST module and matching CPU available, ask), 005505-012 005507-001 rev B,
Intel HX chipset, 4 72-pin SIMM slots, PCI riser card slot with riser card
243056-001 005547-001 rev B gives 3 PCI + 3 ISA slots (some shared), onboard
Cirrus 5436 VGA, untested but should be fine

MOTHERBOARD SOCKET7 S7 Socket 7, proprietary form; IBM PC300GL-P200      $  60
Intel HX-based board 07L6997 07L7353 712, 3 DIMM, onboard Matrox video,
onboard USB + LAN + sound, includes 64MB of weird IBM/LGS EDO DIMM 01K1117
that originally came with it, also includes 32MB of Kingston KTM-0274/32 KTH-
4294/32 added later and fully compatible (might sell separately), includes
3xPCI + 2xISA slot riser card 93H2831711; includes original case lock keys IBM
A307; tested working

MOTHERBOARD SS7 SuperSocket7 ATX/AT (dual-format compatible) baby AT     $  40
form; Soyo SY-5EHM ETEQ EQ82C6638CE '98 based; 1 AGP (1X? 2X?) + 3xPCI +
3xISA; 2 DIMM + 2 SIMM; w/original CD + manual (manual says for SY-6BB, will
sell separately); working ok

MOTHERBOARD SS7 SuperSocket7 ATX/AT (dual-format compatible) baby AT     $  38
form; VIA VT82C597AT / 586B based; 1 AGP (1X?) + 3xPCI + 2xISA; 2 DIMM + 2
SIMM; 100% working ok test 4 days with benchmark stress test; P5V580 VP3

MOTHERBOARD SS7 SuperSocket7 ATX/AT (dual-format compatible) baby AT     $  50
form;, Top Gun TopGun TXpro-based (Intel-TX clone), 3 DIMM + 4 SIMM slots,
tested working

MOTHERBOARD proprietary Compaq 285732-001 15690 v1.3 Cyrix Gx86 GX-133BP $  62
CPU soldered on board, from Presario 2000 PGX-1000, only 1 ISA slot, actually
it might be a riser slot and I might have the riser for it (ask)

PENTIUM CORE 133Mhz Intel CPU, Intel VX based board supports COAST       $  72
(empty), 1 DIMM + 4 SIMM slots, 3PCI+4ISA slots, dying-soon CPU fan, board
works fine/stable

PENTIUM CORE 166Mhz Intel CPU, Intel VX based board, 2 DIMM + 4 SIMM     $  94
slots, 4PCI+3ISA slots, working CPU fan, completely stable, tested ok

PENTIUM CORE 166Mhz Intel Overdrive CPU, Intel FX based board supports   $  91
COAST (empty) but COAST slot might be faulty as system is flaky with the
original COAST in (might have just been that COAST stick), 4 SIMM slots,
2PCI+4ISA slots, proprietary form factor (has PCI riser card), working CPU
fan, seems fine/stable (ask for further testing); 158-021203-000A rev 02;
2351122CP5 002 E70897

PENTIUM CORE 75Mhz AMD K5-PR75 CPU, Intel VX-based board, 4PCI+3ISA      $  47
slots, quality AT mini-tower case & power supply, ISA sound card, working CPU
fan, can build into complete system with other parts from my lists, with
special discount!

PENTIUM CORE 90Mhz Intel CPU, Houston M571 board, noname chipset based   $  60
board, onboard shared video, onboard sound, 2 DIMM + 4 SIMM slots, 4PCI+3ISA
slots, AT desktop case & Enermax power supply, working CPU fan, can build into
complete system with other parts from my lists, with special discount!

PENTIUM CORE HP Pavilion 500 P8561A, Micro ATX MATX M.ATX case with      $ 131
small size (case seems to allow normal size though) power supply 150W Bestec
ATX-1951D, Intel 810-based board S370 (supports Tualatin), 2 DIMM slots, 3PCI;
mini tower case; original floppy drive; case seems to support extra 92mm (or
so) fan at rear, tested working; compatible CPU's available on request

SLOCKET socket 370 to slot 1 convertor; jumpered: bus, dual (no          $   5
voltage); many available

SLOCKET socket 370 to slot 1 convertor; jumpered: bus, with voltage      $  13
jumpers


-- 
THINK IT SHOULD BE CHEAPER?  MAKE AN OFFER!

MINIMUM ORDER AMOUNT $8 EXCLUDING SHIPPING.

Paypal accepted!

E-Mail: webfsused09@tecnopolis.ca

All prices in US$.  For Canadian prices, please see
http://www.tecnopolis.ca/forsale/forsalec.html

Prices do not include shipping unless otherwise stated. Terms are
usually payment up front. Items are shipped within 2 business days of
receipt of payment except for checks and some money orders. Hundreds of
trade references are available upon request. I've been buying and
selling on the net since 1992! Email me for my ebay id if you want to
see my stellar feedback.

Check out my other forsale lists at http://www.tecnopolis.ca/forsale

Email webfsused09@tecnopolis.ca for information.